DC Motor
PMDC Motor for Power Tool
| Items | Parameters | Unit |
|---|---|---|
| # of rotor slot | 10 | EA |
| # of stator magnet pole | 4 | EA |
| Torque | 391 | Gfcm |
| Rated Current | 12.93 | A |
| Current Density | 10.16 | A/mm2 |
| Output Power | 110 | W |
| Cogging Torque | 220 | gfcm |
| Magnet |
Nd-Fe-B (N30EZ : 1.07T, 804kA/m, 216kJ/m3) |
|
DC Motor for Air Pump
| Items | Specification |
|---|---|
| Rated Voltage | 12V DC |
| Rated Current | 0.9 A |
| Power | 10.8 W |
| Air Capacity | 8~14 LPM |
| Starting Voltage | 8 V |
| Shaft Diameter | 8 mm |
| Operating Temperature | 5℃ ~ 45℃ |
| Humidity | 30% ~ 80% RH |
| Max Pressure | 500 mmHg |
| Sound Noise | 55dB@30cm |
| Motor Rated Speed | 2240 rpm |
| Motor Rated Torque | 100 gf-cm |
| Motor Rated Current | 0.35 A |
| Motor Stopping Torque | 960 gf-cm |
| Motor Stall Current | 2.1 A |
Micro DC Geared Motor
| Items | Specification |
|---|---|
| Rated Voltage | 5V DC |
| Operating Voltage | 2.5V ~ 7.5V DC |
| No load Current | 40 ~ 47mA (DC 5V) |
| Temperature | -10℃ ~ 50℃ |
| Humidity | 20% ~ 90% RH |
| No load Speed | 77rpm ±5% |
| Rotation Direction | CW |
| Stall Torque | >1.5 kgf-cm |
| Detent Torque | <0.7 kgf-cm |
| Reduction Ratio | 222.9 : 1 |
| Sound Noise | < 70dB @ 10cm |
DC Geard Motor
| Items | Specification |
|---|---|
| Rated Voltage | 12V / 24V / 220V DC |
| Output Power | 50 / 75 /100 / 150W |
| Speed | 30 ~ 50 rpm |
| Rated Torque | 10 ~ 50NM |
| Operating Temperature | -20℃ ~ 65℃ |
DC Motor for Medical System
| Items | Specification |
|---|---|
| Rated Voltage | DC 215 V |
| Shaft Diameter | 8 mm |
| No load Speed | 2050 rpm |
| No load Current | <0.1 A |
| Rated Speed | 1718 rpm |
| Rated Current | 0.18 A |
| Rated Torque | 150 mNM |
| Rated Power | 27 W |
| Max Efficiency | 70% @1718rpm(27W) |
| Max Power | 48 W |
| Stall Torque | 606 mNM |